FireCADCalc

Heat of Reaction from Heats of Formation

Standard heat of reaction from the heats of formation and coefficients of up to three reactants and three products (Hess's law), per mole of reaction.

Refinery and petrochemicalChemical and fertiliserFood, dairy and textile

Inputs

Examples: Methane combustion to H2O(g)Ammonia synthesisWater-gas shift CO + H2O(g)

Reactants

Products

Results

Heats of formation of the right phase (gas or liquid water) at 25 °C from a property table; elements are zero.

Heat of reaction (negative: exothermic)-41.154kJ/mol
Sum over products-393.51kJ/mol
Sum over reactants-352.36kJ/mol

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Methane combustion to H2O(g). The inputs, in the units selected above:

InputValue
Reactant 1: coefficient1.0000 -
Reactant 1: heat of formation-74.870 kJ/mol
Reactant 2: coefficient2.0000 -
Reactant 2: heat of formation0 kJ/mol
Reactant 3: coefficient0 -
Reactant 3: heat of formation0 kJ/mol
Product 1: coefficient1.0000 -
Product 1: heat of formation-393.51 kJ/mol
Product 2: coefficient2.0000 -
Product 2: heat of formation-241.83 kJ/mol
Product 3: coefficient0 -
Product 3: heat of formation0 kJ/mol

Applying the formula below gives:

ResultValue
Heat of reaction (negative: exothermic)-802.29 kJ/mol
Sum over products-877.16 kJ/mol
Sum over reactants-74.870 kJ/mol

Open this example in the calculator and change any input.

Formula

\(\Delta H_r = \sum \nu_p \Delta H_{f,p} - \sum \nu_r \Delta H_{f,r}\)

Variables

Symbol Meaning SI unit
\(\nu_{r1}\) Reactant 1: coefficient -
\(\Delta H_{f,r1}\) Reactant 1: heat of formation J/mol
\(\nu_{r2}\) Reactant 2: coefficient -
\(\Delta H_{f,r2}\) Reactant 2: heat of formation J/mol
\(\nu_{r3}\) Reactant 3: coefficient -
\(\Delta H_{f,r3}\) Reactant 3: heat of formation J/mol
\(\nu_{p1}\) Product 1: coefficient -
\(\Delta H_{f,p1}\) Product 1: heat of formation J/mol
\(\nu_{p2}\) Product 2: coefficient -
\(\Delta H_{f,p2}\) Product 2: heat of formation J/mol
\(\nu_{p3}\) Product 3: coefficient -
\(\Delta H_{f,p3}\) Product 3: heat of formation J/mol
\(\Delta H_r\) Heat of reaction (negative: exothermic) J/mol
\(\Sigma\nu\Delta H_f\) Sum over products J/mol

Method and standards

Hess's law.

Where it is used

  • Reactor heat balances.
  • Combustion and gasification checks.

Common mistakes

  • Wrong phase of water.
  • Sign of the result.

Assumptions and limits

  • Standard state, 25 °C.
  • The equation is not checked for balance: the species are entered only by their heats of formation, so balance the reaction yourself before entering the coefficients.

References

  • Hess's law ΔH_r = Σν ΔH_f(products) − Σν ΔH_f(reactants)

Questions and answers

CH₄ + 2O₂ → CO₂ + 2H₂O(g)?

ΔH_r = -802.29 kJ/mol: methane's net heat of combustion.

Liquid water?

Use −285.83 kJ/mol for H₂O(l): the gross value results.

Other temperatures?

Add the sensible heat of reactants and products (Kirchhoff).

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.