FireCADCalc

Gas ppm to mg/m³ and mg/Nm³ Conversion

Convert a gas concentration between ppm by volume and mg/m³ at any pressure and temperature, and mg/Nm³ at 0 °C and 101.325 kPa, from the molar mass.

Thermal power plantRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 100 ppm SO₂ at 25 °C50 ppm NOx as NO₂ at 20 °C1 000 ppm CO at 150 °C stack

Default: SO₂, S + 2 O from the IUPAC conventional atomic weights (64.058 kg/kmol).

Results

Same basis as the ppm reading (wet or dry). Emission limits are usually in mg/Nm³ on dry gas at a reference O₂: correct for moisture and oxygen separately.

Concentration at p and T261.86mg/m³
Concentration at 0 °C and 101.325 kPa285.82mg/Nm³
mg/m³ per ppm at p and T2.6186

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 ppm SO₂ at 25 °C. The inputs, in the units selected above:

InputValue
Concentration (ppm by volume)100.00 -
Molar mass of the gas64.064 kg/kmol
Pressure (absolute)1.0132 bar
Temperature25.000 °C

Applying the formula below gives:

ResultValue
Concentration at p and T261.86 mg/m³
Concentration at 0 °C and 101.325 kPa285.82 mg/Nm³
mg/m³ per ppm at p and T2.6186

Open this example in the calculator and change any input.

Formula

\(c_m = c_v \times 10^{-6}\, \frac{p\, M}{R\, T}, \quad c_N = c_v \times 10^{-6}\, \frac{M}{V_{m,N}}\)

Variables

Symbol Meaning SI unit
\(c_v\) Concentration (ppm by volume) -
\(M\) Molar mass of the gas kg/kmol
\(p\) Pressure (absolute) Pa
\(T\) Temperature K
\(c_m\) Concentration at p and T kg/m³
\(c_N\) Concentration at 0 °C and 101.325 kPa kg/m³
\(k\) mg/m³ per ppm at p and T -

Method and standards

Ideal gas law.

Where it is used

  • Emission reporting.
  • Analyser and limit comparison.

Common mistakes

  • Using 24.45 L/mol for normal conditions.
  • NOx as NO instead of NO₂.

Assumptions and limits

  • Ideal gas.
  • The result is on the same basis (wet or dry) as the ppm value; no dry-gas or reference-O₂ correction is made.

References

  • Ideal gas law: mg/m³ = ppm × M p / (R T)

Questions and answers

What is 100 ppm SO₂ in mg/Nm³?

286 mg/Nm³ (at 0 °C, 1 atm).

And NOx?

Reported as NO₂ (46.0 g/mol): 1 ppm = 2.05 mg/Nm³.

Why is it different at 25 °C?

A cubic metre at 25 °C holds 8 % less gas than at 0 °C.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.