FireCADCalc

Monod Growth: Specific Rate, Doubling Time and Chemostat Washout

Specific growth rate by Monod with Levenspiel product inhibition, doubling time, and the steady state, washout dilution rate and productivity of a chemostat.

Sugar mill and cogenerationDistillery and ethanolChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Yeast, mu_max 0.4 /h, D 0.2 /hWith 45 g/L ethanol, D 0.15 /hAbove washout

Results

Specific growth rate at S and P0.384621/h
Doubling time1.8022h
Washout dilution rate0.396041/h
Steady-state substrate at D0.20000g/L
Steady-state biomass at D9.9000g/L
Biomass productivity1.9800kg/(m³·h)

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Yeast, mu_max 0.4 /h, D 0.2 /h. The inputs, in the units selected above:

InputValue
Maximum specific growth rate0.40000 1/h
Saturation constant0.20000 g/L
Substrate concentration5.0000 g/L
Inhibiting product concentration0 g/L
Product concentration that stops growth90.000 g/L
Inhibition exponent1.0000 -
Feed substrate concentration (chemostat)20.000 g/L
Biomass yield on substrate0.50000 kg/kg
Dilution rate0.20000 1/h

Applying the formula below gives:

ResultValue
Specific growth rate at S and P0.38462 1/h
Doubling time1.8022 h
Washout dilution rate0.39604 1/h
Steady-state substrate at D0.20000 g/L
Steady-state biomass at D9.9000 g/L
Biomass productivity1.9800 kg/(m³·h)

Open this example in the calculator and change any input.

Formula

\(\mu = \mu_{max}\left(1 - \frac{P}{P_m}\right)^n\frac{S}{K_s + S}, \quad t_d = \frac{\ln2}{\mu}, \quad D_{crit} = \mu'_{max}\frac{S_0}{K_s + S_0}\)

\(S_{ss} = \frac{K_sD}{\mu'_{max} - D}, \quad X_{ss} = Y_{X/S}(S_0 - S_{ss})\)

Variables

Symbol Meaning SI unit
\(\mu_{max}\) Maximum specific growth rate 1/s
\(K_s\) Saturation constant kg/m³
\(S\) Substrate concentration kg/m³
\(P\) Inhibiting product concentration kg/m³
\(P_m\) Product concentration that stops growth kg/m³
\(n\) Inhibition exponent -
\(S_0\) Feed substrate concentration (chemostat) kg/m³
\(Y_{X/S}\) Biomass yield on substrate kg/kg
\(D\) Dilution rate 1/s
\(\mu\) Specific growth rate at S and P 1/s
\(t_d\) Doubling time s
\(D_{crit}\) Washout dilution rate 1/s
\(S_{ss}\) Steady-state substrate at D kg/m³
\(X_{ss}\) Steady-state biomass at D kg/m³
\(DX\) Biomass productivity kg/(m³·s)

Method and standards

Monod with Levenspiel inhibition (product concentration taken as fixed).

Where it is used

  • Yeast propagation and continuous fermentation.
  • Effluent treatment kinetics.

Common mistakes

  • Using batch μ_max for a different medium.
  • Running near washout with no margin.

Assumptions and limits

  • Single limiting substrate; no maintenance or death terms.
  • In a real chemostat the product concentration depends on D; holding P fixed while finding S_ss and X_ss is an approximation.
  • With no growth (S = 0 or P at or above P_m) the doubling time is infinite and is not shown.

References

  • Doran
  • Bioprocess Engineering Principles
  • 2nd ed. (Academic Press, 2013)
  • ch. 12 (Monod kinetics, chemostat steady state and washout)
  • Levenspiel (1980)
  • Biotechnol. Bioeng. 22: 1671 (product inhibition (1 − P/P_m)ⁿ)

Questions and answers

What is washout?

If the dilution rate exceeds the highest growth rate the culture can reach on the feed, cells leave faster than they grow and the fermenter empties of biomass.

Why include product inhibition?

Ethanol and other products slow growth; with ethanol P_m is about 90–110 g/L for Saccharomyces.

What do the defaults give?

μ_max 0.4 /h, K_s 0.2 g/L at 5 g/L: μ 0.38 /h, doubling time about 1.8 h; washout above 0.396 /h.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.