Worked example
Example: Yeast, mu_max 0.4 /h, D 0.2 /h. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Maximum specific growth rate | 0.40000 1/h |
| Saturation constant | 0.20000 g/L |
| Substrate concentration | 5.0000 g/L |
| Inhibiting product concentration | 0 g/L |
| Product concentration that stops growth | 90.000 g/L |
| Inhibition exponent | 1.0000 - |
| Feed substrate concentration (chemostat) | 20.000 g/L |
| Biomass yield on substrate | 0.50000 kg/kg |
| Dilution rate | 0.20000 1/h |
Applying the formula below gives:
| Result | Value |
|---|---|
| Specific growth rate at S and P | 0.38462 1/h |
| Doubling time | 1.8022 h |
| Washout dilution rate | 0.39604 1/h |
| Steady-state substrate at D | 0.20000 g/L |
| Steady-state biomass at D | 9.9000 g/L |
| Biomass productivity | 1.9800 kg/(m³·h) |
Open this example in the calculator and change any input.
Formula
\(\mu = \mu_{max}\left(1 - \frac{P}{P_m}\right)^n\frac{S}{K_s + S}, \quad t_d = \frac{\ln2}{\mu}, \quad D_{crit} = \mu'_{max}\frac{S_0}{K_s + S_0}\)
\(S_{ss} = \frac{K_sD}{\mu'_{max} - D}, \quad X_{ss} = Y_{X/S}(S_0 - S_{ss})\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\mu_{max}\) | Maximum specific growth rate | 1/s |
| \(K_s\) | Saturation constant | kg/m³ |
| \(S\) | Substrate concentration | kg/m³ |
| \(P\) | Inhibiting product concentration | kg/m³ |
| \(P_m\) | Product concentration that stops growth | kg/m³ |
| \(n\) | Inhibition exponent | - |
| \(S_0\) | Feed substrate concentration (chemostat) | kg/m³ |
| \(Y_{X/S}\) | Biomass yield on substrate | kg/kg |
| \(D\) | Dilution rate | 1/s |
| \(\mu\) | Specific growth rate at S and P | 1/s |
| \(t_d\) | Doubling time | s |
| \(D_{crit}\) | Washout dilution rate | 1/s |
| \(S_{ss}\) | Steady-state substrate at D | kg/m³ |
| \(X_{ss}\) | Steady-state biomass at D | kg/m³ |
| \(DX\) | Biomass productivity | kg/(m³·s) |
Method and standards
Monod with Levenspiel inhibition (product concentration taken as fixed).
Where it is used
- Yeast propagation and continuous fermentation.
- Effluent treatment kinetics.
Common mistakes
- Using batch μ_max for a different medium.
- Running near washout with no margin.
Assumptions and limits
- Single limiting substrate; no maintenance or death terms.
- In a real chemostat the product concentration depends on D; holding P fixed while finding S_ss and X_ss is an approximation.
- With no growth (S = 0 or P at or above P_m) the doubling time is infinite and is not shown.
References
- Doran
- Bioprocess Engineering Principles
- 2nd ed. (Academic Press, 2013)
- ch. 12 (Monod kinetics, chemostat steady state and washout)
- Levenspiel (1980)
- Biotechnol. Bioeng. 22: 1671 (product inhibition (1 − P/P_m)ⁿ)
Questions and answers
What is washout?
If the dilution rate exceeds the highest growth rate the culture can reach on the feed, cells leave faster than they grow and the fermenter empties of biomass.
Why include product inhibition?
Ethanol and other products slow growth; with ethanol P_m is about 90–110 g/L for Saccharomyces.
What do the defaults give?
μ_max 0.4 /h, K_s 0.2 g/L at 5 g/L: μ 0.38 /h, doubling time about 1.8 h; washout above 0.396 /h.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.