Worked example
Example: mu 0.15 /h, 10 g/L in 20 m3, 10 h. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Target specific growth rate | 0.15000 1/h |
| Initial biomass (dry cell weight) | 10.000 g/L |
| Initial volume | 20.000 m³ |
| Biomass yield (dry cells per substrate consumed) | 0.50000 kg/kg |
| Feed substrate concentration | 500.00 g/L |
| Residual substrate held in the vessel | 0.10000 g/L |
| Time from the start of feeding | 10.000 h |
Applying the formula below gives:
| Result | Value |
|---|---|
| Initial feed rate | 120.02 L/h |
| Feed rate at t | 537.91 L/h |
| Volume at t | 22.786 m³ |
| Biomass in the vessel at t | 896.34 kg |
| Biomass concentration at t | 39.337 g/L |
Open this example in the calculator and change any input.
Formula
\(F(t) = \frac{\mu X_0V_0}{Y_{X/S}(S_f - S)}e^{\mu t}, \quad V(t) = V_0 + \frac{X_0V_0}{Y_{X/S}(S_f - S)}\left(e^{\mu t} - 1\right), \quad X(t)V(t) = X_0V_0e^{\mu t}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\mu\) | Target specific growth rate | 1/s |
| \(X_0\) | Initial biomass | kg/m³ |
| \(V_0\) | Initial volume | m³ |
| \(Y_{X/S}\) | Biomass yield | kg/kg |
| \(S_f\) | Feed substrate concentration | kg/m³ |
| \(S\) | Residual substrate held in the vessel | kg/m³ |
| \(t\) | Time from the start of feeding | s |
| \(F_0\) | Initial feed rate | m³/s |
| \(F(t)\) | Feed rate at t | m³/s |
| \(V(t)\) | Volume at t | m³ |
| \(XV(t)\) | Biomass in the vessel at t | kg |
| \(X(t)\) | Biomass concentration at t | kg/m³ |
Method and standards
Substrate balance at constant μ.
Where it is used
- Baker's yeast and yeast propagation.
- Recombinant protein fermentations.
Common mistakes
- μ above the Crabtree threshold for yeast.
- Ignoring oxygen limits late in the batch.
Assumptions and limits
- Constant yield; no maintenance.
- X is dry cell weight per litre; Y is dry biomass per kg of the limiting substrate in the feed.
- μ t above 50 is rejected (overflow). A note appears when X(t) passes about 150 g/L or the volume grows more than tenfold, which no real vessel follows.
References
- Doran
- Bioprocess Engineering Principles
- 2nd ed. (Academic Press, 2013)
- ch. 14 (fed-batch culture, exponential feeding)
Questions and answers
Why feed exponentially?
Biomass grows exponentially at constant μ, and so does its substrate demand; a matched feed keeps substrate low and growth steady.
Why keep substrate low?
High sugar in aerobic yeast causes overflow to ethanol (Crabtree effect) and lowers yield.
What do the defaults give?
10 g/L in 20 m³ at μ 0.15 /h: feed starts at 120 L/h and reaches about 540 L/h after 10 h.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.