Worked example
Example: 205/55 R16 → 225/45 R17. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Original tyre width (mm) | 205.00 - |
| Original aspect ratio (%) | 55.000 - |
| Original rim diameter (inch) | 16.000 - |
| New tyre width (mm) | 225.00 - |
| New aspect ratio (%) | 45.000 - |
| New rim diameter (inch) | 17.000 - |
| Rolling-to-overall diameter factor | 0.97000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Original overall diameter | 631.90 mm |
| New overall diameter | 634.30 mm |
| Original revolutions per km | 519.31 |
| New revolutions per km | 517.35 |
| Speedometer error (reading − true)/true | -0.37837 % |
Open this example in the calculator and change any input.
Formula
\(D = 25.4D_r + 2W\frac{AR}{100}, \quad N = \frac{1000}{\pi kD}, \quad e = \frac{D_1}{D_2} - 1\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(W_1\) | Original tyre width (mm) | - |
| \(AR_1\) | Original aspect ratio (%) | - |
| \(D_{r1}\) | Original rim diameter (inch) | - |
| \(W_2\) | New tyre width (mm) | - |
| \(AR_2\) | New aspect ratio (%) | - |
| \(D_{r2}\) | New rim diameter (inch) | - |
| \(k\) | Rolling-to-overall diameter factor | - |
| \(D_1\) | Original overall diameter | m |
| \(D_2\) | New overall diameter | m |
| \(N_1\) | Original revolutions per km | - |
| \(N_2\) | New revolutions per km | - |
| \(e\) | Speedometer error (reading − true)/true | - |
Method and standards
Tyre geometry.
Where it is used
- Fleet tyre changes.
- Speedometer and odometer correction.
Common mistakes
- Mixing inches and millimetres.
- Ignoring load deflection.
Assumptions and limits
- Metric radial sizes.
References
- Metric tyre designation: D = rim × 25.4 + 2 × width × aspect/100 (ETRTO convention)
Questions and answers
How do I read 205/55 R16?
205 mm section width, sidewall height 55 % of the width, radial construction, 16-inch rim.
Why does a bigger tyre make the speedometer under-read?
Each turn covers more road, but the speedometer counts turns.
What do the defaults represent?
Changing from 205/55 R16 to 225/45 R17.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.