FireCADCalc

Raw Sugar Melter: Water or Sweet Water and Melt Purity

Water or sweet water to melt raw sugar to a target melt brix by a solids balance, the melt flow and the melt purity.

Sugar mill and cogeneration

Inputs

Examples: Melt with sweet waterMelt with water

Results

Sweet water or water6.8824t/h
Melt21.882t/h
Melt purity99.000%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Melt with sweet water. The inputs, in the units selected above:

InputValue
Raw sugar20.000 t/h
Raw sugar brix (dry substance)99.000 %
Raw sugar purity98.500 %
Sweet water brix (0 for water)10.000 %
Sweet water purity95.000 %
Target melt brix65.000 %

Applying the formula below gives:

ResultValue
Sweet water or water12.364 t/h
Melt32.364 t/h
Melt purity98.294 %

Open this example in the calculator and change any input.

Formula

\(\dot m_w = \dot m_r\frac{Bx_r - Bx_m}{Bx_m - Bx_w}, \quad P_m = \frac{\dot m_r Bx_r P_r + \dot m_w Bx_w P_w}{\dot m_r Bx_r + \dot m_w Bx_w}\)

Variables

Symbol Meaning SI unit
\(\dot m_r\) Raw sugar kg/s
\(Bx_r\) Raw sugar brix (dry substance) -
\(P_r\) Raw sugar purity -
\(Bx_w\) Sweet water brix (0 for water) -
\(P_w\) Sweet water purity -
\(Bx_m\) Target melt brix -
\(\dot m_w\) Sweet water or water kg/s
\(\dot m_m\) Melt kg/s
\(P_m\) Melt purity -

Method and standards

Solids and pol balance.

Where it is used

  • Back-end refineries and raw sugar melting.

Common mistakes

  • Purity mixed by mass of product instead of solids.

Assumptions and limits

  • No losses.
  • With no raw sugar the melt purity is undefined and is not shown.

References

  • Solids and pol balance

Questions and answers

Why sweet water instead of water?

Sweet water from washing and desweetening recovers sugar and avoids extra evaporation.

Typical melt brix?

About 60–68 brix, high enough to save evaporation and low enough to filter.

Melt purity?

Raw sugar purity diluted slightly by the sweet water's purity.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.