Worked example
Example: Melt with sweet water. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Raw sugar | 20.000 t/h |
| Raw sugar brix (dry substance) | 99.000 % |
| Raw sugar purity | 98.500 % |
| Sweet water brix (0 for water) | 10.000 % |
| Sweet water purity | 95.000 % |
| Target melt brix | 65.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Sweet water or water | 12.364 t/h |
| Melt | 32.364 t/h |
| Melt purity | 98.294 % |
Open this example in the calculator and change any input.
Formula
\(\dot m_w = \dot m_r\frac{Bx_r - Bx_m}{Bx_m - Bx_w}, \quad P_m = \frac{\dot m_r Bx_r P_r + \dot m_w Bx_w P_w}{\dot m_r Bx_r + \dot m_w Bx_w}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_r\) | Raw sugar | kg/s |
| \(Bx_r\) | Raw sugar brix (dry substance) | - |
| \(P_r\) | Raw sugar purity | - |
| \(Bx_w\) | Sweet water brix (0 for water) | - |
| \(P_w\) | Sweet water purity | - |
| \(Bx_m\) | Target melt brix | - |
| \(\dot m_w\) | Sweet water or water | kg/s |
| \(\dot m_m\) | Melt | kg/s |
| \(P_m\) | Melt purity | - |
Method and standards
Solids and pol balance.
Where it is used
- Back-end refineries and raw sugar melting.
Common mistakes
- Purity mixed by mass of product instead of solids.
Assumptions and limits
- No losses.
- With no raw sugar the melt purity is undefined and is not shown.
References
- Solids and pol balance
Questions and answers
Why sweet water instead of water?
Sweet water from washing and desweetening recovers sugar and avoids extra evaporation.
Typical melt brix?
About 60–68 brix, high enough to save evaporation and low enough to filter.
Melt purity?
Raw sugar purity diluted slightly by the sweet water's purity.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.