FireCADCalc

Tank Volume with Dished Ends (Torispherical, Ellipsoidal)

Volume of a cylindrical tank or vessel with 2:1 ellipsoidal, torispherical or hemispherical dished ends, with the depth and volume of each head.

Process steam and utilitiesRefinery and petrochemicalChemical and fertiliserBoilerTank and drum

Inputs

Examples: 2:1 ellipsoidal, 2 m diameter, 5 m shell, two endsTorispherical 100/10, 3 m diameter, 8 m shell, two endsHemispherical, 1.5 m diameter, 4 m shell, one end

Torispherical head

Results

Inside dimensions; the straight flange of each head belongs in the shell length.

Depth of one dished end750.00mm
Volume of one dished end0.88357m³
Volume of the straight shell7.0686m³
Total volume7.9522m³
Overall inside length4.7500m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 2:1 ellipsoidal, 2 m diameter, 5 m shell, two ends. The inputs, in the units selected above:

InputValue
Type of dished end2:1 semi-ellipsoidal
Inside diameter2.0000 m
Straight shell length, tangent to tangent5.0000 m
Number of dished endsTwo
Crown radius as a multiple of D1.0000 -
Knuckle radius as a multiple of D0.10000 -

Applying the formula below gives:

ResultValue
Depth of one dished end500.00 mm
Volume of one dished end1.0472 m³
Volume of the straight shell15.708 m³
Total volume17.802 m³
Overall inside length6.0000 m

Open this example in the calculator and change any input.

Formula

\(V_h = \frac{\pi D^3}{24}\ (2{:}1\ \text{ellipsoidal}), \quad V_h = \frac{\pi D^3}{12}\ (\text{hemispherical})\)

\(V_h = \pi \int_0^{h} x(y)^2\, dy \ \ (\text{torispherical: knuckle arc then crown arc})\)

\(V = \frac{\pi D^2}{4} L + n V_h, \quad L_t = L + n h\)

Variables

Symbol Meaning SI unit
\(\text{head}\) Type of dished end -
\(D\) Inside diameter m
\(L\) Straight shell length, tangent to tangent m
\(n\) Number of dished ends -
\(R / D\) Crown radius as a multiple of D -
\(r / D\) Knuckle radius as a multiple of D -
\(h\) Depth of one dished end m
\(V_h\) Volume of one dished end m³
\(V_s\) Volume of the straight shell m³
\(V\) Total volume m³
\(L_t\) Overall inside length m
\(R, r\) Crown and knuckle radii of a torispherical head m
\(x(y)\) Inside radius of the head profile at height y above the tangent line m

Method and standards

Head volumes are solids of revolution of their inside profile. The torispherical head is integrated exactly in closed form: knuckle of radius r centred D/2 − r from the axis, crown of radius R, tangent where the line of centres meets the knuckle arc.

Where it is used

  • Vessel and tank capacity for drums, receivers and storage tanks.
  • Checking a maker's stated capacity.
  • Hold-up volume of boiler drums and deaerators.

Common mistakes

  • Using outside instead of inside diameter.
  • Counting the straight flange twice.
  • Using the 2:1 formula for a torispherical head (which holds less).

Assumptions and limits

  • Inside dimensions; head thickness not included.
  • Full volume only; for partial levels use the partial-volume calculators.

References

  • Geometry of ellipsoidal
  • torispherical and hemispherical heads (volume of revolution)

Questions and answers

What does a 2:1 ellipsoidal head hold?

πD³/24: for a 2 m diameter, 1.047 m³, with a depth of D/4 = 0.5 m. A 5 m shell with two such heads holds 17.8 m³.

How is a torispherical head worked out?

As two pieces of a surface of revolution: the knuckle torus near the shell and the spherical crown cap, joined where the two arcs are tangent. A 3 m head with crown radius D and knuckle 0.1D holds 2.67 m³ and is 0.58 m deep.

Does the straight flange count?

Put it in the shell length: the head volume here starts at the tangent line.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.