Worked example
Example: Vmax 10, Km 2 at S 5. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Maximum rate (any rate unit) | 10.000 - |
| Michaelis constant | 2.0000 g/L |
| Substrate concentration | 5.0000 g/L |
| Test 1 substrate | 1.0000 g/L |
| Test 1 rate | 3.3333 - |
| Test 2 substrate | 10.000 g/L |
| Test 2 rate | 8.3333 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Rate at S | 7.1429 |
| Fraction of maximum rate | 71.429 % |
| V_max from the two tests | 10.000 |
| K_m from the two tests | 2.0000 g/L |
Open this example in the calculator and change any input.
Formula
\(v = \frac{V_{max}S}{K_m + S}, \quad \frac1v = \frac{K_m}{V_{max}}\frac1S + \frac{1}{V_{max}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(V_{max}\) | Maximum rate (any rate unit) | - |
| \(K_m\) | Michaelis constant | kg/m³ |
| \(S\) | Substrate concentration | kg/m³ |
| \(S_1\) | Test 1 substrate | kg/m³ |
| \(v_1\) | Test 1 rate | - |
| \(S_2\) | Test 2 substrate | kg/m³ |
| \(v_2\) | Test 2 rate | - |
| \(v\) | Rate at S | - |
| \(v/V_{max}\) | Fraction of maximum rate | - |
| \(V_{max,fit}\) | V_max from the two tests | - |
| \(K_{m,fit}\) | K_m from the two tests | kg/m³ |
Method and standards
Michaelis–Menten.
Where it is used
- Enzyme dosing in starch and cellulose hydrolysis.
- Bioreactor kinetics.
Common mistakes
- Using rates measured after substrate depletion.
- Fitting the reciprocal line to noisy data.
Assumptions and limits
- Initial rates; no inhibition.
- The two halves are independent: the rate at S uses the entered V_max and K_m, not the constants fitted from the two tests.
References
- Michaelis–Menten kinetics and the Lineweaver–Burk reciprocal plot (Doran, Bioprocess Engineering Principles, 2nd ed., ch. 11)
Questions and answers
What is K_m?
The substrate concentration at which the rate is half of V_max; a low K_m means the enzyme works well at low substrate.
Why is the rate nearly constant at high substrate?
The enzyme is saturated; adding substrate cannot make it work faster.
What do the defaults represent?
An enzyme with V_max 10 and K_m 2 g/L, and two test points that fit those constants.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.