FireCADCalc

Electric Vehicle Energy per km and Range

Energy per km of an electric vehicle at steady speed from road load, drivetrain efficiency and auxiliaries, and the range from usable battery energy.

Thermal power plantProcess steam and utilitiesSugar mill and cogeneration

Inputs

Examples: 40 kWh car at 80 km/h, 1 kW auxiliariesCity bus 300 kWh at 30 km/h, 5 kW

Results

Level road, steady speed, still air; city driving with regenerative braking can use less, and cold weather heating much more. 1 J/m = 0.2778 Wh/km.

Power at the wheels11.063kW
Energy per distance627.61Wh/km
Range406.30km

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 40 kWh car at 80 km/h, 1 kW auxiliaries. The inputs, in the units selected above:

InputValue
Battery capacity40.000 kWh
Usable fraction90.000 %
Vehicle mass1,600.0 kg
Rolling resistance coefficient0.009000 -
Drag area0.65000 m²
Steady speed80.000 km/h
Battery-to-wheel efficiency85.000 %
Auxiliary load (air conditioning, electronics)1.0000 kW
Air density1.2000 kg/m³

Applying the formula below gives:

ResultValue
Power at the wheels7.4180 kW
Energy per distance121.59 Wh/km
Range296.08 km

Open this example in the calculator and change any input.

Formula

\(e = \frac{(mgC_{rr} + \frac12\rho C_dAv^2)v/\eta + P_{aux}}{v}, \quad R = \frac{uE_b}{e}\)

Variables

Symbol Meaning SI unit
\(E_b\) Battery capacity J
\(u\) Usable fraction -
\(m\) Vehicle mass kg
\(C_{rr}\) Rolling resistance coefficient -
\(C_dA\) Drag area m²
\(v\) Steady speed m/s
\(\eta\) Battery-to-wheel efficiency -
\(P_{aux}\) Auxiliary load (air conditioning, electronics) W
\(\rho\) Air density kg/m³
\(P_w\) Power at the wheels W
\(e\) Energy per km (Wh/km) -
\(R\) Range m

Method and standards

Energy balance.

Where it is used

  • Fleet electrification studies.
  • Plant electric vehicles and buses.

Common mistakes

  • Using nominal instead of usable capacity.
  • Ignoring auxiliaries in slow traffic.

Assumptions and limits

  • Steady speed; level road; still air; no regeneration.
  • The auxiliary load is drawn straight from the battery (not divided by the drivetrain efficiency).
  • Energy per km is shown in Wh/km in every unit system (1 J/m = 0.2778 Wh/km).

References

  • Road-load energy balance (Gillespie, Fundamentals of Vehicle Dynamics (SAE, 1992), ch. 4; Larminie and Lowry, Electric Vehicle Technology Explained)

Questions and answers

Why does range drop on the highway?

Aerodynamic drag grows with speed squared, so energy per km rises quickly above 80 km/h.

How much does air conditioning cost?

A 1 kW load at 30 km/h adds 33 Wh/km, a large share in slow city traffic.

What do the defaults represent?

A 40 kWh mid-size electric car cruising at 80 km/h with 1 kW of auxiliaries.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.